axk(5/6)f narrow-pitch connectors for board-to-board connection narrow pitch (0.5mm) connectors p5 series ?p5kf features 1. the connector is a two-piece structure and 0.5mm pitch. the product lineup consists of the mated height of 1.5mm, 2.0mm and 2.5mm. 2. strong resistance to adverse environments! utilizes construction for high contact reliability. 1) the socket and header has the same dropping shock and torsion resistant construction as the bellows-type contact. 2) v notch construction used for excellent resistance against foreign matters. 3) use of ni barrier construction is standard. highly effective against solder creeping. (available from oct. 2005) 4) porosity treatment applied for improved resistance against corrosion. 3. simple locking structure superior mating operation with click feel to indicate that mating is complete. 4. mating length 0.55mm while achieving a low pro?e of 1.5mm between pcbs, the effective mating length has been extended to ensure that there is some latitude in the mating. 5. the lower connector bottom surface construction prevents contact and shorts between the pcb and metal terminals. this enables freedom in pattern wiring, helping to make pcb s smaller. 6. automatic mounting inspection is facilitated by the gull-wing terminal shape which makes mounting veri?ation easy. 7. compliance with rohs directive environmentally friendly, the connectors comply with europe s rohs directive. cadmium, lead, mercury, hexavalent, chromium, pbb and pbde are not used. 8. connectors for inspection available connectors for inspection are available that are ideal for modular unit inspection and inspection in device assembly processes. applications ?cellular phones ?phs ?portable data terminals ?digital cameras ?compact portable devices socket header since the contact is formed by bending thin plate, it has a spring-like quality. this construction helps make it resistant to dropping and twisting. what is v notch construction? by using the edge for the contacting part and increasing contact pressure per unit area, the effectiveness in removing flux and contaminants is increased compared to its predecessor. this is also effective in preventing the trapping of contaminants. [cross section of contacting part] without notch with v notch header side contact cross section socket side contact cross section what is ni barrier construction? by providing an exposed nickel part on the gold (au) plated contact, solder creeping is prevented despite the ultra low profile. socket side contact [contact] header side contact ni barrier exposed ni part cu ni au cross section of socket side contact pinholes ni plating base material porosity treatment film what is porosity treatment? au plating surrounding gas this treatment consists of coating the surface with a very thin film to seal pinholes in the gold plating. this porosity treatment technology ensures the same contact reliability for thin gold plating as that of thick gold plating. improvement in insertion/removal durability improvement in resistance to corrosion improvement in contact reliability for digital signals simple lock mechanism 0.55mm connector bottom: create any thru-hole and pattern wiring. 1.5mm pcb narrow-pitch connectors p5kf fpc reinforcing plate before mating ideal for board-to-fpc connections after mating the simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single-action insertion on the pcb. this enables the number of pins to be doubled white the size remains the same as that for existing fpc connectors. this, in turn, contributes to making products and equipment more compact. all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f table of product types ordering information socket header 1.5mm mated height 10 12 14 16 18 20 22 24 26 30 32 34 36 40 44 50 60 70 80 100 product name p5kf ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 2.0mm 2.5mm ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? notes: 1. the standard type comes without positioning bosses. connectors with positioning boss are available for on-demand production. 2. please consult us for products which have no ? mark. number of contacts mated height 3: for mated height 1.5 mm 5: for mated height 2.0 mm and 2.5 mm 3: for mated height 1.5 mm and 2.0 mm 5: for mated height 2.5 mm surface treatment (contact portion / terminal portion) 5: ni plating on base, au plating on surface/ni plating on base, au plating on surface 7: ni plating on base, au plating on surface/ni plating on base, au plating on surface (for ni barrier product available from oct. 2005) contact portion y: v notch type product (chamfered on both sides) y: v notch type product number of contacts (2 digits) packing g: 2,000 pieces embossed tape and plastic reel 2 (from oct. 2005) j: 2,000 pieces embossed tape and paper reel 2 5f: narrow pitch connector p5kf (0.5 mm pitch) socket 6f: narrow pitch connector p5kf (0.5 mm pitch) header functions 3: with positioning bosses 4: without positioning bosses axk all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f product types notes: 1. regarding ordering units, during production: please make orders in 1-reel units. samples for mounting con?mation: available in units of 50 pieces. please consult us. (see ?egarding sample orders to con?m proper mounting on page 13.) samples: small lot orders are possible. please consult us. 2. the standard type comes without positioning bosses. connectors with positioning bosses are available for on-demand production. for this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. mated height 1.5mm, 10 contacts for sockets: axk5f1033 7yg 3. the 11th digit ? in the socket/header part number indicates the connector has a v notch. (for details, please consult one of our sales of?es.) mated height no. of contacts part no. packing socket header inner carton (1-reel) outer carton ni barrier product: not available (paper reel) (plastic reel) (recommendation) ni barrier product: not available (paper reel) (plastic reel) (recommendation) 1.5 mm 10 axk5f10345yj axk5f10347yg (from oct. 2005) AXK6F10345yj AXK6F10347yg (from oct. 2005) 2,000 pieces 4,000 pieces 12 axk5f12345yj axk5f12347yg (from oct. 2005) AXK6F12345yj AXK6F12347yg (from oct. 2005) 14 axk5f14345yj axk5f14347yg (from oct. 2005) AXK6F14345yj AXK6F14347yg (from oct. 2005) 16 axk5f16345yj axk5f16347yg (from oct. 2005) AXK6F16345yj AXK6F16347yg (from oct. 2005) 18 axk5f18345yj axk5f18347yg (from oct. 2005) AXK6F18345yj AXK6F18347yg (from oct. 2005) 20 axk5f20345yj axk5f20347yg (from oct. 2005) AXK6F20345yj AXK6F20347yg (from oct. 2005) 22 axk5f22345yj axk5f22347yg (from oct. 2005) AXK6F22345yj AXK6F22347yg (from oct. 2005) 24 axk5f24345yj axk5f24347yg (from oct. 2005) AXK6F24345yj AXK6F24347yg (from oct. 2005) 26 axk5f26345yj axk5f26347yg (from oct. 2005) AXK6F26345yj AXK6F26347yg (from oct. 2005) 30 axk5f30345yj axk5f30347yg (from oct. 2005) AXK6F30345yj AXK6F30347yg (from oct. 2005) 32 axk5f32345yj axk5f32347yg (from oct. 2005) AXK6F32345yj AXK6F32347yg (from oct. 2005) 34 axk5f34345yj axk5f34347yg (from oct. 2005) AXK6F34345yj AXK6F34347yg (from oct. 2005) 40 axk5f40345yj axk5f40347yg (from oct. 2005) AXK6F40345yj AXK6F40347yg (from oct. 2005) 50 axk5f50345yj axk5f50347yg (from oct. 2005) AXK6F50345yj AXK6F50347yg (from oct. 2005) 60 axk5f60345yj axk5f60347yg (from oct. 2005) AXK6F60345yj AXK6F60347yg (from oct. 2005) 70 axk5f70345yj axk5f70347yg (from oct. 2005) AXK6F70345yj AXK6F70347yg (from oct. 2005) 80 axk5f80345yj axk5f80347yg (from oct. 2005) AXK6F80345yj AXK6F80347yg (from oct. 2005) 2.0 mm 10 axk5f10545yj axk5f10547yg (from oct. 2005) AXK6F10345yj AXK6F10347yg (from oct. 2005) 2,000 pieces 4,000 pieces 12 axk5f12545yj axk5f12547yg (from oct. 2005) AXK6F12345yj AXK6F12347yg (from oct. 2005) 14 axk5f14545yj axk5f14547yg (from oct. 2005) AXK6F14345yj AXK6F14347yg (from oct. 2005) 16 axk5f16545yj axk5f16547yg (from oct. 2005) AXK6F16345yj AXK6F16347yg (from oct. 2005) 18 axk5f18545yj axk5f18547yg (from oct. 2005) AXK6F18345yj AXK6F18347yg (from oct. 2005) 20 axk5f20545yj axk5f20547yg (from oct. 2005) AXK6F20345yj AXK6F20347yg (from oct. 2005) 22 axk5f22545yj axk5f22547yg (from oct. 2005) AXK6F22345yj AXK6F22347yg (from oct. 2005) 24 axk5f24545yj axk5f24547yg (from oct. 2005) AXK6F24345yj AXK6F24347yg (from oct. 2005) 26 axk5f26545yj axk5f26547yg (from oct. 2005) AXK6F26345yj AXK6F26347yg (from oct. 2005) 30 axk5f30545yj axk5f30547yg (from oct. 2005) AXK6F30345yj AXK6F30347yg (from oct. 2005) 34 axk5f34545yj axk5f34547yg (from oct. 2005) AXK6F34345yj AXK6F34347yg (from oct. 2005) 40 axk5f40545yj axk5f40547yg (from oct. 2005) AXK6F40345yj AXK6F40347yg (from oct. 2005) 50 axk5f50545yj axk5f50547yg (from oct. 2005) AXK6F50345yj AXK6F50347yg (from oct. 2005) 60 axk5f60545yj axk5f60547yg (from oct. 2005) AXK6F60345yj AXK6F60347yg (from oct. 2005) 70 axk5f70545yj axk5f70547yg (from oct. 2005) AXK6F70345yj AXK6F70347yg (from oct. 2005) 80 axk5f80545yj axk5f80547yg (from oct. 2005) AXK6F80345yj AXK6F80347yg (from oct. 2005) 100 axk5f00545yj axk5f00547yg (from oct. 2005) AXK6F00345yj AXK6F00347yg (from oct. 2005) 2.5 mm 10 axk5f10545yj axk5f10547yg (from oct. 2005) AXK6F10545yj AXK6F10547yg (from oct. 2005) 12 axk5f12545yj axk5f12547yg (from oct. 2005) AXK6F12545yj AXK6F12547yg (from oct. 2005) 14 axk5f14545yj axk5f14547yg (from oct. 2005) AXK6F14545yj AXK6F14547yg (from oct. 2005) 16 axk5f16545yj axk5f16547yg (from oct. 2005) AXK6F16545yj AXK6F16547yg (from oct. 2005) 20 axk5f20545yj axk5f20547yg (from oct. 2005) AXK6F20545yj AXK6F20547yg (from oct. 2005) 22 axk5f22545yj axk5f22547yg (from oct. 2005) AXK6F22545yj AXK6F22547yg (from oct. 2005) 24 axk5f24545yj axk5f24547yg (from oct. 2005) AXK6F24545yj AXK6F24547yg (from oct. 2005) 30 axk5f30545yj axk5f30547yg (from oct. 2005) AXK6F30545yj AXK6F30547yg (from oct. 2005) 34 axk5f34545yj axk5f34547yg (from oct. 2005) AXK6F34545yj AXK6F34547yg (from oct. 2005) 36 axk5f36545yj axk5f36547yg (from oct. 2005) AXK6F36545yj AXK6F36547yg (from oct. 2005) 40 axk5f40545yj axk5f40547yg (from oct. 2005) AXK6F40545yj AXK6F40547yg (from oct. 2005) 44 axk5f44545yj axk5f44547yg (from oct. 2005) AXK6F44545yj AXK6F44547yg (from oct. 2005) 50 axk5f50545yj axk5f50547yg (from oct. 2005) AXK6F50545yj AXK6F50547yg (from oct. 2005) 60 axk5f60545yj axk5f60547yg (from oct. 2005) AXK6F60545yj AXK6F60547yg (from oct. 2005) 70 axk5f70545yj axk5f70547yg (from oct. 2005) AXK6F70545yj AXK6F70547yg (from oct. 2005) 80 axk5f80545yj axk5f80547yg (from oct. 2005) AXK6F80545yj AXK6F80547yg (from oct. 2005) 100 axk5f00545yj axk5f00547yg (from oct. 2005) AXK6F00545yj AXK6F00547yg (from oct. 2005) all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f specifications 1. characteristics 2. material and surface treatment item speci?ations conditions electrical characteristics rated current 0.5a/contact (max. 10 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 minute detection current: 1ma insulation resistance min. 1,000m ? (initial) using 500v dc megger contact resistance max. 90m ? measured based on the hp4338b measurement method of jis c 5402 mechanical characteristics composite insertion force max. 0.981n {100gf}/contacts contacts (initial) composite removal force min. 0.0588n {6gf}/contacts contacts post holding force min. 0.981n {100gf}/contact measures the maximum load in the post axial direction until removal environmental characteristics ambient temperature ?5? to +85? no freezing at low temperatures soldering heat resistance max. peak temperature of 245? infrared re?w soldering 300? within 5 seconds soldering iron thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 90m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 40??, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 35??, saltwarter concentration 5?% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 90m ? bath temperature 40??, gas concentration 3? ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/hours unit weight mated height 1.5mm, 20 contacts; socket: 0.06g header: 0.04g part name material surface treatment molded portion heat-resistant resin (ul94v-0) contact/post copper alloy contact portion: ni plating on base, au plating on surface terminal portion: ni plating on base, au plating on surface (except for thick of terminal) however, the area adjacent to the terminal on ni barrier models is exposed to ni on base. 0 ? +3 0 all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f dimensions mm general tolerance: 0.2 ?socket and header are mated ?socket (mated height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 36 12.00 8.50 40 13.00 9.50 44 14.00 10.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 c 0.10 (0.80) (0.80) 0.12 0.03 0.50 0.05 1.70 (suction face) 4.80 b 0.1 a 4.20 5.80 0.20 0.03 0.50 0.05 mated height c 1.5 mm 1.35 2.0 mm, 2.5 mm 1.85 ?header (mated height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 36 12.00 8.50 40 13.00 9.50 44 14.00 10.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 mated height c 1.5 mm, 2.0 mm 1.25 2.5 mm 1.75 0.10 1.80 0.12 0.03 (0.75) 3.30 (0.75) c 0.96 a 2.50 b 0.1 0.50 0.050.50 0.05 0.20 0.03 (suction face) mated height: 1.5 mm mated height: 2.0 mm mated height: 2.5 mm 1.50 0.15 2.00 0.15 2.50 0.15 all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f embossed tape dimensions (unit:mm, common for respective contact type, socket and header) dimension table (mm) (1) suf?: p (1 reel, 2,000 pieces embossed tape: plastic reel package) ... from oct. 2005 (2) suf?: j (1 reel, 2,000 pieces embossed tape: paper reel package) connector orientation with respect to direction of progress of embossed tape mated height no. of contacts type of taping a b c d e f quantity per reel socket and header are common: 1.5mm, 2.0mm, 2.5mm 10 to 58 tape i 24.0 11.5 12.0 25.4? 380 dia. 2,000 pcs. 60 to 70 tape ii 32.0 28.4 14.2 12.0 33.4? 380 dia. 2,000 pcs. 72 to 100 tape ii 44.0 40.4 20.2 12.0 45.4? 380 dia. 2,000 pcs. mated height no. of contacts type of taping a b c d e f quantity per reel socket and header are common: 1.5mm, 2.0mm, 2.5mm 10 to 58 tape i 24.0 11.5 12.0 24.4 370 dia. 2,000 pcs. 60 to 70 tape ii 32.0 28.4 14.2 12.0 32.4 370 dia. 2,000 pcs. 72 to 100 tape ii 44.0 40.4 20.2 12.0 44.4 370 dia. 2,000 pcs. tape dimensions (conforming to jis c 0806-1990. however, some tapes have mounting hole pitches that do not comply with the standard.) tape i tape ii 1.75 c d a 0.3 4 2 1.5 dia. +0.1 0 pull out direction 1.75 c d a 0.3 4 2 pull out direction b 1.5 dia. +0.1 0 plastic reel dimensions (conforming to eiaj et-7200b)/ paper reel dimensions (conforming to jis c 0806-1990) f e top cover tape emboss carrier tape +2 0 +2 0 +2 0 type direction of tape progress common for p5kf socket header note: there is no indication on this product regarding top-bottom or left-right orientation. all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f connector for inspection usage applications with 3,000 insertion and removal times narrow pitch connector p5kf (0.5 mm pitches) for inspection usage features 1. 3,000 insertion and removals (when as recommended) from the 50 insertion and removals of standard type, up to 3,000 insertion and removals (with recommended insertion and removal) are possible for use in inspection. ideal for inspection of module units and inspection during the device assembly process 2. same external dimensions and foot pattern as standard type. since shape is the same as standard type, inspection is possible without interfering with devices in the vicinity of standard connectors. 3. improved mating insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (we cannot warrant anything regarding mating retention.) socket header table of produt types product name p5kf for inspection ? : available for sale 10 12 14 16 18 20 22 24 26 30 32 34 40 50 60 70 80 100 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? notes: 1. you can use with each mated height in common. 2. please inquire about numbers of contacts other than those given above. 3. please inquire with us regarding delivery times. 4. please keep the minimum unit for ordering no less than 50 pieces per lot. 5. please inquire for further information. number of contacts all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
axk(5/6)f notes 1. as shown below, excess force during insertion may result in damage to the connector or removal of the solder. please be careful. also, to prevent connector damage please con rm the correct position before mating connectors. 2. keep the pc board warp no more than 0.03 mm in relation to the overall length of the connector. 3. pc boards and recommended metal mask patterns connectors are mounted with high density, with a pitch interval of 0.4 to 0.5 mm. it is therefore necessary to make sure that the right levels of solder are used, in order to reduce solder bridge and other issues. the ?ures to the right are recommended metal mask patterns. please use them as a reference. ?socket recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 ? (opening area ratio: 56%) recommended metal mask pattern metal mask thickness: here, 120 ? (opening area ratio: 69%) ?header recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 ? (opening area ratio: 58%) recommended metal mask pattern metal mask thickness: here, 120 ? (opening area ratio: 72%) max. 0.03mm max. 0.03mm b 0.05 0.25 0.05 4.00 0.05 6.80 0.05 0.125 0.05 0.30 0.05 0.50 0.05 0.50 0.05 0.23 0.01 0.50 0.01 0.50 0.01 6.80 0.01 5.10 0.01 (0.85) (0.85) b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.70 0.01 6.80 0.01 (1.05)(1.05) b 0.01 0.125 0.05 0.30 0.05 b 0.05 0.25 0.05 0.50 0.050.50 0.05 1.60 0.05 4.30 0.05 0.23 0.01 0.50 0.01 0.50 0.01 4.30 0.01 (0.85)(0.85) 2.60 0.01 b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.30 0.01 (1.05) 2.20 0.01 (1.05) b 0.01 * see the dimension table for more information on the b dimension of the socket and header. regarding general notes, please refer to page 12. for other details, please verify with the product speci?ation sheets. all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd. 11/2005
|
